GER Research Group

Representative publications


  • Galán, B., Viguri, J.R., Cifrian, E., Dosal, E., Andrés, A., Influence of input streams on the construction and demolition waste (CDW) recycling performance of basic and advanced treatment plants, 2019

    Journal of Cleaner Production, 236, 117523. 

  • Cifrian, E., Coronado, M., Quijorna, N., Alonso Santurde, R., Andrés, A., Waelz slag-based construction ceramics: effect of the trial scale on technological and environmental properties, 2019

    Journal of Material Cycles and Waste Management, 21(6), pp. 1437-1448 


  • Muñoz, I., Cifrian, E., Andrés, A., San Miguel, G. , Ruiz, D., Viguri, J.R., Analysis of environmental benefits associated with the incorporation of Waelz slag into fired bricks using LCA., 2018

    Construction and Building Materials 168 (2018) 178–186.


  • Coronado, M., Andrés, A., Cheeseman, Chris, Acid gas emissions from structural clay products containing secondary resources: foundry sand dust and Waelz slag., 2016

    Journal of Cleaner Production.2016


  • Coronado, M., Segãdaes, A.M., Andrés, A., Using mixture design of experiments to assess the environmental impact of clay-based structural ceramics containing foundry wastes, 2015

    Journal of Hazardous Materials, 299, 529-539


  • Quijorna, N., de Pedro, M., Romero, M., Andrés, A., Characterisation of the sintering behaviour of Waelz slag from electric arc furnace (EAF) dust recycling for use in the clay ceramics industry, 2014

    Journal of Environmental Management 132, 278-286. IF: 3.057; Quartile in Category Q1 in Environmental Sciences (39/210).


  • Alonso Santurde, R., Coz, A., Viguri, J.R., Andrés, A., Recycling of foundry by-products in the ceramic industry: Green and core sand in clay bricks, 2012

    Construction and Building Materials 27 (1), pp. 97-106.


  • Coz, A., Villegas, M., Andrés, A., Viguri, J.R., Mantzavinos, D., Xekoukoulotakis, N.P., Management scenarios for olive oil mill waste based on characterization and leaching tests, 2011

    Journal of Chemical Technology and Biotechnology 86 (12), pp. 1542-1547.

  • Alonso Santurde, R., Andrés, A., Viguri, J.R., Raimondo, M., Guarini, G., Zanelli, C., Dondi, M., Technological behaviour and recycling potential of spent foundry sands in clay bricks, 2011

    Journal of Environmental Management 92 (3), pp. 994-1002.


  • Alonso Santurde, R., Coz, A., Quijorna, N., Viguri, J.R., Andrés, A., Valorization of Foundry Sand in Clay Bricks at Industrial Scale, 2010

    Journal of Industrial Ecology 14 (2), pp. 217-230.


  • Coz, A., Andrés, A., Soriano, S., Viguri, J.R., Ruiz, M.C., Irabien, J.A., Influence of commercial and residual sorbents and silicates as additives on the stabilisation/solidification of organic and inorganic industrial waste, 2009

    Journal of Hazardous Materials 164 (2-3), pp. 755-761.

  • Romero, M., Andrés, A., Alonso Santurde, R., Viguri, J.R., Rincón, J.Ma., Phase evolution and microstructural characterization of sintered ceramic bodies from contaminated marine sediments, 2009

    Journal of the European Ceramic Society 29 (1), pp. 15-22.

  • Andrés, A., Díaz, M.C., Coz, A., Abellán, M.J., Viguri, J.R., Physico-chemical characterisation of bricks all through the manufacture process in relation to efflorescence salts, 2009

    Journal of the European Ceramic Society 29 (10), pp. 1869-1877.


  • Alonso Santurde, R., Romero, M., Rincón, J.Ma., Viguri, J.R., Andrés, A., Leaching behaviour of sintered contaminated marine sediments, 2008

    Fresenius Environmental Bulletin 17 (10 B), pp. 1736-1743.


  • Beltrán, P., Irabien, A., Coz, A., Andrés, A., Larrión, M., Gutiérrez-Cañas, C., Legarreta, J.A., Environmental quality control in Portland cement: Rawmaterials, clinker and mortars, 2006

    Fresenius Environmental Bulletin 15 (9 A), pp. 1081-1086.